0
There no items in your cart.
Checkout
MJTRENDS

newbie

The product become to thick.

The product  become to thick. Is there any way to make it thin. 

Chloe, March 12th 2018 11:47:19 pm

Adnan - presumably you are talking about latex adhesive when you say the product has gotten too thick?  If...

1

newbie

first round of trial and error done, I'd like to coffee-talk

Lessons learned:I had no idea that one must clean off the latex before applying adhesive; otherwise, the adhesive will not stick not one bit not at all. Whoopsies. So now having perused this forum for solutions, I've ordered some...

JP, April 13th 2018 3:57:03 pm

Cleaning - many solvents can damage latex, so be careful.  The solvent MJ Trends sells for their...

1

apprentice

PVC/Latex adhesives

Is there a way to adhere the back (non-shiny) side of 4-way stretch PVC to latex? Or the non -shiny side to the shiny side without sewing? I know PVC can be sewn to itself but not to latex and the adhesive sold at MJ only bonds...

Zavora, January 24th 2018 7:11:22 pm

Thanks so much, Chloe!

Chloe, January 24th 2018 9:39:16 am

You could try to rubberize the backside of the pvc fabric.  You'll want to use the ammonia based adhesive and...

2

newbie

Latex Bodysuit with 3D Detailing. (Cosplay)

I'm looking at finally going forward with making a dream cosplay of mine Asuka Langley from Evangelion and noticed there isn't too much assistance online. I particularly love the 3D detailing and skin tight plastic look of...

Chloe, January 24th 2018 9:36:55 am

Foam covered with latex would work for the wristbands.  You'll want to make sure that you design the latex...

1

newbie

VacBed Construction

Morning.I'm going to be creating a latex vacbed shortly but I had a question that I can't seem to find the answer to on the web.When building the PVC frame, how should I attach the latex sleeve to the PVC frame penetration(where...

D3monic1, November 3rd 2018 1:23:15 pm

For breathing tubes I use a circular hole punch made for leatherworking.  Make a round patch slightly larger...

Chloe, January 24th 2018 9:59:52 am

I've seen several vacbeds that use a reinforced hole for the breathing hole. If you cut a slit, it is very likely...

2