Latex Forum

I would advise that you give it a try and see what happens.  It can't hurt.  If you have some scrap latex lying around use it on a piece, give it a full 24 hours to cure, and see what kind of strength you get from it. 

Remember, you want to use a flat seam and not a simple edge seam.  Check out the video here if you need clarification:  www.mjtrends.com/tutorial,How-to-make-a-basic-latex-seam.  Also, mjtrends does ship to Canada if you would like to purchase our latex adhesive here:  http://www.mjtrends.com/categories-Adhesive,Notions.

Best of luck!

Thx a lot!

I did finally purchase the adhesive from MJTrends...and it works wonders! Its easy to use and very solid!

Contact Cement terrible at bonding latex together,  use rubber cement diluted with contact cement thinner.  Brush on seam let dry.  then brush on a second time and let dry then press seams together. 

The edges will roll up when you apply the glue,  once it's dried it will relax enough to work with. 

I am trying to make a dress with fairly complex seams and wavey contours. Would the gluing a complex seam be the same as a straight seem? If so, what are the differences? What would make it easier? Also, i am wanting to put corset type lacing on the back of it. How would i reinforce the latex to avoid tearing? Thank you for any help!