Latex Forum

to this post

Writing on Latex

Posted by: Matthew Vander Ploeg on: 2010-10-18 02:18:48

Hello, I was wondering if anyone had success writing (permanently) on latex with a pen/marker/etc.  It seems most of the markers I try (even permanent) begin to rub off or fade away.

Do you know of anything that is truly permanent?

Thanks!

Matthew R. van der Ploeg

Other threads in this post:

Topic: Permanent marker for latex

Posted by: Susan on: 2010-10-26 06:27:17

I've used a Sharpie brand permanent marker to write on latex and it's been 3 years and my design hasn't faded.  Granted I don't scrub it, but I do rinse it in water after wearing and haven't had any trouble. 

Topic: RE: Writing on Latex

Posted by: Matthew Vander Ploeg on: 2010-10-31 12:44:13

Thanks for the reply Susan... when I try a sharpie marker on the latex I'm using (.50mm from MJTrends), it still can be rubbed away leaving a faded mark/image.  Any ideas why it might not be working as well?

I even tried a Sharpie "professional" marker which is supposed to be good on non-porous surfaces.  I've been letting it dry for +/- 12 hours before touching it... not sure if that affects the permanence of the mark.

Thanks for any additional help!

Topic: RE: Writing on Latex

Posted by: Matthew Vander Ploeg on: 2010-10-31 12:44:13

Thanks for the reply Susan... when I try a sharpie marker on the latex I'm using (.50mm from MJTrends), it still can be rubbed away leaving a faded mark/image.  Any ideas why it might not be working as well?

I even tried a Sharpie "professional" marker which is supposed to be good on non-porous surfaces.  I've been letting it dry for +/- 12 hours before touching it... not sure if that affects the permanence of the mark.

Thanks for any additional help!

Topic: writing on latex

Posted by: Susan on: 2010-11-10 12:19:26

Honestly I didn't test the area.  I just tried to be as gentle as possible.  It may take a couple days to fully cure - I would give it plenty of time and see what happens.

Topic: Writing on latex

Posted by: Babylatex on: 2011-06-21 12:22:19

I use STAEDTLER permanent lumocolor Art 318-3

S&A

Your Recommendations
Blue Snakeskin Fabric Blue Snakeskin Fabric Our Price: $9.50 /yard
Blue-Jean PVC Fabric Blue-Jean PVC Fabric Our Price: $7.99 /yard
Metallic-blue .20mm Latex-Sheeting Metallic-blue .20mm Latex-Sheeting Our Price: $7.99 /yard
Yellow .60mm Latex-Sheeting Yellow .60mm Latex-Sheeting Our Price: $14.99 /yard